The corrosion-resistant stainless steel material of the kiln mesh belt can resist acid and alkali substances and high temperature environments, is not easy to rust, rarely needs maintenance and replacement, and can maintain long-term stable service performance.
The annealing furnace mesh belt is used for solid solution of small parts, stainless steel heat treatment and bright annealing under the action of hydrogen produced by ammonia calciner as a protective atmosphere.
Powder metallurgy sintering furnace mesh belt is also known as sintering mesh belt, high temperature mesh belt, which is made of imported Nippon Steel Company SUS314 material from Japan, and has a temperature resistance of more than 1200 degrees. It is widely used in continuous operation sintering production lines.
Powder metallurgy sintering furnace mesh belt is also known as sintering mesh belt, high temperature mesh belt, which is made of imported Nippon Steel Company SUS314 material from Japan, and has a temperature resistance of more than 1200 degrees. It is widely used in continuous operation sintering production lines.
Quenching furnace mesh belt, anti-oxidation, mesh belt weaving adopts herringbone encryption structure, high tensile strength, in order to prevent parts from leaking, the edge is folded or baffled, the mesh belt passes the workpiece through the temperature-controlled heating area, and then falls into the quenching oil tank, and is automatically taken out by the mesh belt elevator. It is suitable for small and medium-sized mechanical parts in batches.
Dryer conveyor belt cleaning The material of the drying mesh belt is stainless steel, so the cleaning strength is high, the elasticity is small, it is not easy to deform, and it is easy to maintain.
The main principle of high temperature metal dryer mesh belt is to evenly spread the materials on the mesh belt. The mesh belt adopts 12-60 mesh stainless steel mesh belt, which is driven by the transmission device to move back and forth in the dryer.
The solar photovoltaic mesh belt is mainly used in the photovoltaic industry, relying on the effective contact point of the thimble to smoothly place the silicon plate for heat treatment, and the products have been used in major enterprises at home and abroad.
Photovoltaic mesh belt Mesh solar photovoltaic mesh belt is mainly used for the heat treatment of photovoltaic industry (solar silicon panel), mainly made of stainless steel superalloy, and the mesh surface is welded into thimble according to the requirements.
Dryer mesh belt cleaning The material of the drying mesh belt is stainless steel, so the cleaning strength is high, the elasticity is small, it is not easy to deform, it is easy to maintain, and it has strong hygiene, corrosion resistance or harsh environment, and the service life is long
The stainless steel mesh belt is made of high-strength stainless steel material SUS304, SUS316L, 310S, corrosion resistance, high temperature oxidation resistance, the mesh belt weaving mode has a balanced type, the mesh belt does not deviate during operation, and the operation is flexible. It is widely used in various conveying lines.
Stainless steel mesh belt varieties are complete, high-quality stainless steel conveyor mesh belt, high temperature resistance, no deformation, high strength, stable performance, wear-resistant and durable, reliable quality.
The balance conveyor mesh belt of brazing furnace is made of SUS314 material imported from Nippon Steel Corporation of Japan, and has a temperature resistance of more than 1200 degrees. It is widely used in continuous brazing production lines. Mesh belt according to different brazing parts
Mesh belt for quenching furnace, 314 stainless steel strap rim mesh belt is made of SUS314 or SUS310S material imported from Nippon Steel Corporation of Japan, * temperature resistance above 1200 degrees, oxidation resistance, mesh belt weaving adopts herringbone encryption structure, high tensile strength
The high temperature resistant conveyor mesh belt has large mesh hole, strong structure, long conveyor line body, large overall tension, high temperature resistance and corrosion resistance.
Powder metallurgy sintering: Powder metallurgy sintering furnace mesh belt is also called sintering mesh belt and high temperature mesh belt, which is made of SUS314 imported from Nippon Steel Company of Japan, * with a temperature resistance of over 1200 degrees, and is widely used in continuous operation sintering production line. Mainly used for pressing
The catalyst roasting and drying mesh belt is made of high-quality high-strength stainless steel wire, the material is SUS304, SUS316L, etc., rust-proof, acid and alkali resistance, high temperature resistance, uniform mesh and high tensile strength
The mesh belt is made of high strength material 1Cr13, 1Cr17, SUS304, etc. The weaving forms are balanced, herringbone, horseshoe, chain plate, the pitch of the mesh belt is uniform, the design of threading is wave, and the elongation is small
The mesh belt of the quenching furnace is made of SUS314 or SUS310S imported from Nippon Steel Corporation of Japan, * the temperature resistance is above 1200 degrees, the oxidation resistance, the mesh belt weaving adopts herringbone encryption structure, and the tensile strength is high. In order to prevent parts from leaking, the edge is folded or baffled
High temperature resistant stainless steel belt, B net belt, conveyor belt, conveyor belt is also called B net belt, chocolate net belt, trapezoidal net belt, one net belt, strip net belt.
304 stainless steel mesh belt is widely used in brazing and other bright heat treatment of stainless steel, carbon steel, brass, copper, ceramics and other parts in automobile, diesel engine, aviation, aerospace, air conditioning and refrigeration, gas water heater, electronics, microwave magnetron and other industries.
Powder metallurgy sintering furnace mesh belt, also known as sintering mesh belt, high temperature mesh belt, adopts imported Nippon Steel Corporation SUS314 material, * temperature resistance above 1200 degrees
Solar photovoltaic mesh belt is mainly used for heat treatment of photovoltaic industry (solar silicon panel), mainly made of stainless steel superalloy, and the mesh surface is welded into thimble according to requirements.
Photovoltaic mesh belt Mesh solar photovoltaic mesh belt is mainly used for the heat treatment of photovoltaic industry (solar silicon panel), mainly made of stainless steel superalloy, and the mesh surface is welded into thimble according to the requirements.
The material of the cleaning and drying mesh belt is stainless steel, so the cleaning strength is high, the elasticity is small, it is not easy to deform, it is easy to maintain, and it has strong hygiene, corrosion resistance or harsh environment, and it has a long service life.
The high temperature mesh belt of the sintering furnace has a temperature resistance of more than 1200 degrees, and is widely used in the continuous operation sintering production line. It can carry out the ideal continuous sintering process flow under the condition of protective atmosphere.
Dryer conveyor belt cleaning The material of the drying mesh belt is stainless steel, so the cleaning strength is high, the elasticity is small, it is not easy to deform, and it is easy to maintain.
The stainless steel conveyor belt of tunnel furnace adopts herringbone mesh belt braiding mode, and the material can choose general stainless steel, such as AISI 304, 316L, etc. It can be used in the conveyor line of general equipment such as powder metallurgy, heat treatment, brazing, etc.
Quenching furnace mesh belt, anti-oxidation, mesh belt weaving adopts herringbone encryption structure, high tensile strength, in order to prevent parts from leaking, the edge is folded or baffled, the mesh belt passes the workpiece through the temperature-controlled heating area, and then falls into the quenching oil tank, and is automatically taken out by the mesh belt elevator. It is suitable for small and medium-sized mechanical parts in batches.
Acid-and alkali-resistant metal mesh belt, industrial quick-freezing machine quick-freezing line transmission belt adopts high-quality high-strength stainless steel wire, SUS304, SUS316, etc., rust-proof, acid-and alkali-resistant, weaving form balance type, fixed horseshoe shape on both sides, uniform pitch of mesh belt, good air permeability, flexible turning, uniform surface structure of mesh belt
The food conveyor belt is processed by professional technology as a load-bearing skeleton, with high tensile strength, wear and tear resistance, oil resistance, sanitation and easy cleaning.
The material of AISI314 mesh belt is AISI314, and the form of plate, wire, bar and other forms can be selected. The mesh belt can be customized as balanced mesh belt, double-strand balanced mesh belt, single-strand balanced mesh belt, Great Wall mesh belt, B mesh belt, ladder mesh belt, chain mesh belt, etc.
The solar photovoltaic mesh belt is mainly used in the photovoltaic industry, relying on the effective contact point of the thimble to smoothly place the silicon plate for heat treatment, and the products have been used in major enterprises at home and abroad.
The food high temperature industrial mesh belt has been processed by professional technology as a load-bearing skeleton, with high tensile strength, good flexure, thin and light belt body, good flexibility, and not easy to deform.
Dryer mesh belt cleaning The material of the drying mesh belt is stainless steel, so the cleaning strength is high, the elasticity is small, it is not easy to deform, it is easy to maintain, and it has strong hygiene, corrosion resistance or harsh environment, and the service life is long
Brazing furnace stainless steel mesh back to furnace high temperature conveyor belt heat resistant conveyor belt is widely used in automobile, diesel engine, aviation, aerospace, air conditioning refrigeration, gas water heater, electronics, microwave magnetron and other industries of stainless steel, carbon steel, brass, copper, ceramics and other parts of the brazing and other bright heat treatment.
Balanced mesh chain conveying mesh belt, metal stainless steel mesh belt, raw materials are made of high-quality non-embroidered steel, sourced from domestic and foreign well-known suppliers. There are SUS304, SUS316, SUS314, SUS321, SUS309, SUS310, etc.
Stainless steel sprocket is the auxiliary fittings of sprocket mesh belt, the material can choose stainless steel 304, 316, 17-4PH and 420, etc., cooperate with the conveying mesh belt to transmit, stabilize the flatness, etc.
High temperature resistant mesh belt, stainless steel mesh chain, dryer conveyor belt High temperature resistant mesh belt, stainless steel mesh chain, dryer conveyor belt cleaning The material of the drying mesh belt is stainless steel, so the cleaning strength is high, the elasticity is small, it is not easy to deform, it is easy to maintain, and it is hygienic and corrosion resistant
Metal conveyor belt corrosion resistance strong stainless steel material can resist acid and alkali substances and high temperature environment, not easy to rust, rarely need maintenance and replacement, can maintain long-term stable performance.
Heat-treated mesh belt, stainless steel conveyor belt, raw materials are made of high-quality non-embroidered steel, from domestic and foreign well-known suppliers.
Photovoltaic mesh belt Mesh solar photovoltaic mesh belt is mainly used for the heat treatment of photovoltaic industry (solar silicon panel), mainly made of stainless steel superalloy, and the mesh surface is welded into thimble according to the requirements, so it is also called: thimble mesh belt or bridge mesh belt
Solar photovoltaic mesh belt: Solar photovoltaic mesh belt is widely used in silicon wafer light source furnace, drying furnace, sintering furnace product transportation, the main materials are 310S, 314, Cr20Ni80; The braiding mode adopts balanced type and single and double rail transmission
The catalyst roasting and drying mesh belt is made of high-quality high-strength stainless steel wire, the material is SUS304, SUS316L, etc., rust-proof, acid and alkali resistance, high temperature resistance, uniform mesh and high tensile strength
The mesh belt of blackening furnace improves the working environment of workers, achieves the requirements of high efficiency, energy saving and environmental protection, and reduces labor intensity and cost.
Stainless steel B mesh belt, conveyor belt, conveyor belt is also known as B mesh belt, chocolate mesh belt, trapezoidal mesh belt, one-shaped mesh belt, strip mesh belt, usually driven by gear positioning.
Powder metallurgy sintering furnace mesh belt is also known as sintering mesh belt, high temperature mesh belt, which is made of imported Nippon Steel Company SUS314 material from Japan, and has a temperature resistance of more than 1200 degrees. It is widely used in continuous operation sintering production lines.
Stainless steel mesh belt for heat treatment quenching furnace tempering furnace, raw materials are made of high-quality non-embroidered steel, sourced from well-known domestic and foreign suppliers. There are SUS304, SUS316, SUS314, SUS321, SUS309, SUS310, etc.
Catalyst drying mesh belt The mesh belt adopts 12-60 mesh stainless steel mesh belt, which is driven by the transmission device to move back and forth in the dryer, so as to achieve the purpose of drying.
The material drying mesh belt is made of high-quality high-strength stainless steel wire, the material is 201, 202, 200 CU, SUS304, etc. The mesh belt is wound with flattened wire, and the surface is flat
High temperature and corrosion resistance B net, B net belt is also called B net belt, chocolate net belt, trapezoidal net belt, one net belt, strip net belt.
Stainless steel mesh belt, corrosion resistance, high temperature oxidation resistance, weaving methods have balance type, herringbone, B type, good air permeability, high tensile strength, widely used in various tunnel furnace conveying lines.
High temperature resistant conveyor belt has large mesh, strong structure, long conveyor line, large overall tension, high temperature resistance and corrosion resistance.
The mesh belt is made of SUS314 or SUS310S material of Nippon Steel Corporation of Japan, * the temperature resistance is above 1200 degrees, the oxidation resistance, the mesh belt weaving adopts a balanced structure, and the tensile strength is high
Dry slag discharger mesh belt: Dry slag discharger mesh belt is made of high-quality high-strength stainless steel wire and plate, the material is SUS304, SUS316L, etc., rust-proof, acid-alkali-resistant, high temperature-resistant, uniform mesh of mesh belt, high tensile strength;
Sintering furnace mesh belt: Sintering furnace mesh belt is made of SUS314 material imported from Nippon Steel Corporation of Japan, and has a temperature resistance of more than 1200 degrees. It is widely used in continuous operation sintering production line.
The annealing furnace mesh belt is used for solid solution of small parts, stainless steel heat treatment and bright annealing under the action of hydrogen produced by ammonia calciner as a protective atmosphere.
The metal mesh belt of chemical fiber aldehyde chemical machine has a relatively fine mesh, which can block the leakage of small objects. The mesh belt is firm and has high tensile strength.
Stainless steel mesh chain, high temperature resistant mesh belt, assembly line conveyor network are collectively referred to as chain mesh belt can also be called stainless steel chain mesh
The stainless steel mesh belt raw material adopts high-quality non-embroidered steel, the mesh belt runs smoothly, the deviation phenomenon is small, and the maintenance and splicing are also more convenient.
Battery drying furnace mesh belt, stainless steel conveyor mesh chain, high temperature resistant drying fruit and vegetable cleaning and cooling line In the production process of battery, drying is an important link. The function of the drying furnace mesh belt is to transport the battery uniformly through the drying furnace to achieve effective drying treatment. It helps to improve production efficiency and ensure the quality of the battery.
Tunnel furnace, ceramic baking and quenching furnace, industrial sintering furnace mesh belt, heat treatment furnace mesh belt adopts high strength stainless steel material SUS304, SUS316L, 310S, corrosion resistance, high temperature oxidation resistance, weaving mode has balance type, herringbone, B type, good air permeability, high tensile strength
The main principle of the conveyor belt of the dryer is to spread the materials evenly on the mesh belt, and to move back and forth in the dryer by the transmission device.
The main principle of high temperature metal dryer mesh belt is to evenly spread the materials on the mesh belt. The mesh belt adopts 12-60 mesh stainless steel mesh belt, which is driven by the transmission device to move back and forth in the dryer.
Sintering mesh belt heat treatment furnace mesh belt is made of high-strength stainless steel material, corrosion resistance, high temperature oxidation resistance.
The stainless steel metal mesh belt has strong corrosion resistance, is not easy to rust, is strong and durable, and can withstand greater weight and impact force.
Stainless steel mesh chain food mesh belt heat-resistant conveying mesh belt is made of high-strength stainless steel SUS304, SUS316L, 310S, corrosion resistance, high temperature oxidation resistance, mesh belt weaving methods are balanced, herringbone, B-type, and chains are installed on both sides of the mesh belt
The solar photovoltaic mesh belt is mainly made of stainless steel Cr20Ni80 superalloy, and the mesh surface is welded into thimble according to the requirements.
Powder metallurgy sintering furnace mesh belt is also known as sintering mesh belt, high temperature mesh belt, which is made of imported Nippon Steel Company SUS314 material from Japan, and has a temperature resistance of more than 1200 degrees. It is widely used in continuous operation sintering production lines.
Bright furnace mesh belt, mesh belt atmosphere annealing furnace tempering furnace, powder metallurgy sintering quenching furnace, powder metallurgy sintering furnace mesh belt is also called sintering mesh belt, high temperature mesh belt, made of SUS314 material imported from Nippon Steel Corporation of Japan, * temperature resistance above 1200 degrees
The mesh belt of the dry slag discharger is made of high-quality high-strength stainless steel wire and plate, the material is SUS304, SUS316L, etc., rust-proof, acid-alkali-resistant, high temperature-resistant, and the mesh hole of the mesh belt is uniform
The metal conveying mesh belt is processed by professional technology as a load-bearing skeleton, with high tensile strength, good flexure, thin and light belt body, and not easy to deform.
The stainless steel mesh belt has complete varieties, high temperature resistance, no deformation, high strength, stable performance, wear-resistant and durable.
The corrosion-resistant stainless steel material of the kiln mesh belt can resist acid and alkali substances and high temperature environments, is not easy to rust, rarely needs maintenance and replacement, and can maintain long-term stable service performance.
